HARDINGE CHNC I

Spindle:
Spindle Type: ANSI A2-5"
Hole Through Spindle: 1-3/4"
16C Collet Capacity: 1-5/8"
Step Chucks Capacity: 6"
Power Jaw Chuck (Gripping Capacity): 5"
Expanding Collet Capacity: 3"
Spindle Speed Range (1-rpm steps): 50 - 5,000 rpm
AC Spindle Drive (continuous duty): 7.4 Horsepower
AC Spindle Drive (max, intermittent duty 135% power rating): 10 Horsepower
AC Spindle Drive (max, intermittent duty 162% power rating): 12 Horsepower

Capacities:
Maximum Swing Over Bed: 14"
Maximum Threading Diameter: 8"
Maximum Turning Diameter: 8"
Maximum Fixture Diameter: 9"
Maximum Allowable Weight on Spindle (Including Workholding Device): 75 lbs.

Turret:
Number of Stations: 8
Square Tool Size (Standard): 1/2"
Round Tool Diameter (Standard): Up to 3/4"
X-Axis Travel: 4-1/2"
Z-Axis Travel: 12"
Maximum X-Axis Traverse Rate: 200 ipm
Maximum Z-Axis Traverse Rate: 400 ipm
Maximum Distance from Turret Face to Spindle: 12-1/2"
Indexing Time (Station 1 to 8): 2 Seconds
Indexing Time (Station-To-Station): 1 Second

Miscellaneous:
Least Input Increment: 0.00010"
Least Command Increment: 0.00010"
Compressed Air Requirement: 70 Min. to 90 Max. PSI / 5 to 6 SCFM
Maximum Recommended Ambient Operating Temperature: 113 DEG. F
Coolant Sump Capacity: 30 U.S. gallons

General:
Electrical: 230/440 Volt, Three Phase, 50/60 Hz
Overall Dimensions: 87" x 63" x 65" tall